Deck lights LED Lowest profile in AUS – Cool White – Suits Timber & Composite decks

Low Profile Lighting that will fit into any depth board, plaster, deck or plinth.

Our lights are designed specifically to fit into any thickness wall board or deck board or plinth board, without having to worry about what structure is behind it.  It would be hard to have any obstructions when the depth of light is only 9mm.  So you wont need to chop out noggins or joists with the ULTRA SLIM recessed lights.

Specifications

• 60mm Decking / Plinth Recessed LED Stainless Steel Lights

• Cool White 

• Round

• Full IP67 rated kit including an outdoor transformer (when supplied), and multipurpose T-Connector lead (when supplied).

• These are our trusted product for 4 years and hard to beat when you want to plug, join and go.

• The kit is now fully IP67 rated, the lights, the connections and even the transformer is IP67 rated for use outside, inside, kitchens, bathrooms and so on.

• Inline DC IP67 Rated Transformer/Driver Included when getting kits

• Lights are IP67 rated - suitable for use outdoors

• Transformer have a 2300mm (2.3m) cable for plugging into your wall socket to the first light cable

• 1m cable provide on each light with "upgraded screw" waterproof connectors

• The joining T-Connector cable is a huge 3000mm (3m) long and each joining point is 500mm apart.  Add that to the already 1m cable on the actual light makes for a great option to spread the lights out further apart so you can utilize less transformers and more importantly less power points.

• THIS T-Connector OPTION IS RARE IN THESE plinth lights as most sellers just loop each light causing you to have multiple extension cables and more transformers then our model.

• Each light contains SMD LEDs

• Stainless steel bezel

• Designed to sit flush on any hard flat surface, whether the surface is on the ground or a vertical wall.

• Each T-Connector cable can take 6 lights, but if your joining multiple T-Cables then you lose 1 spot for the joiner so down to 5 lights.,  However you can string 3 T-Cables together with 16 lights using just 1 transformer.

Technical Specifications

• Diamertre - 58-60mm

• Depth - 9mm

• Cutout - 53mm

• Watts per light - 0.5w

• 7 Lumen per light

• LEDs per light - 6

• Outer bezel - 304 Grade Stainless Steel

How to Install

1)  

2)      Think about where your transformer power will plug in under your deck (BTW Bunnings sell IP57 outdoor power points for under $30)

3)      Pop in the light and screw join the 0.5m cable from one light to your next light and so on (the lead goes under your deck)

4)      You can join up to a maximum of 12 lights together for each transformer

5)      Most times you don’t need to glue or seal your lights in the hole

6)      Plug into your power and 12 can run at once

7)      Most people use cool white for decks and blue lights for pool edge decks

My Tips

-          When you build your deck frame get your power sorted under deck then. 

-          Draw out where your lights will be.  A double power point will hold 2 transformers so doing around 24 lights.

-          Don’t worry this is 12v low voltage so your 10amp power can you hold hundreds of lights you just need to get them plugged in.

-          For large decks we suggest you bring your power to the deck then just piggyback outdoor power points on your joist or bears using the same 3 core 2.5mm wire.

-          If you need some extension lighting cables that screw in then just see us

-          Lights look great following fencing

-          Pool edges or steps you should light up-   

-          We install lights around every 40cm when we build

Prices

$8 per light

$19 per Transformer

$280 - 30 lights and 3 transformers

$95 - 10 lights and 1 Transformer